EDIFIER R1280DB - Remote Control

Remote control
1. Power ON/OFF
2. Mute
3. Volume decrease
4. Volume increase
5. Line in1 input
6. Line in2 input
7. Optical input
8. Coaxial input
9. Bluetooth input (Press and hold to disconnect
Bluetooth devices)
10. Pause/play (for Bluetooth only)
11. Previous track (for Bluetooth only)
12. Next track (for Bluetooth only)
Batte loading:
Please refer to the illustration to open the
batte compament, inse the CR2025
batte and close the compament.
Note:
1. Do not place the remote control in places that are hot and humid.
2. Do not charge the batteries.
3. Remove the batteries when unused for a long period of time.
4. The batte should not be exposed to excessive heat such as direct sun, re or similar.
5. Danger of explosion if batte is incorrectly replaced. Replace only with the same or equivalent type.
PUSH
1 2
3 4
5 6
7 8
9
10
1211
COX
WARNING!
1. Don’t swallow the batte; danger of chemical burn.
2. The product includes a wafer batte. Swallowing this batte may lead to inju or death. Do not place the new
or old batte in where children can get to it.
3. Don’t use the product if the batte cover is missing or not closed, and keep the remote inaccessible to children.
4. Please go to the hospital immediately if the batte is swallowed.