Page 4 Connection
Page 5 Bluetooth operation
1. Press the master volume knob on the active speaker or on the remote control to select Bluetooth
mode, LED indicator will turn blue.
2. Set your Bluetooth device (mobile phone, tablet etc.) to search and connect "EDIFIER R1580MB".
Note:
* The Bluetooth on R1580MB can only be searched and connected after the speaker switched into Bluetooth
mode. The existing Bluetooth connection will be disconnected once the speaker is switched into other audio
inputs. When the speaker is switched back to Bluetooth mode, the speaker will try to connect to the last
connected Bluetooth audio source device.
* Pin code is “0000” if it is needed.
* To enjoy all Bluetooth functions of this product, please ensure your audio source device has A2DP and
AVRCP profile.
* Bluetooth connectivity and compatibility may be different between different source devices, depending on
the software versions of source devices.
Blue
1. Connect the speakers with the speaker connecting cable.
2. Connect audio source (mobile phone, tablet etc.) to PC IN/AUX IN input on the
active speaker rear panel using the included audio cable, LED indicator will turn
green.
3. Connect to power source and turn on the speaker, power indicator is lit.
4. Play music and adjust volume to a comfortable level.
5. R1580MB can be connected to microphone. Insert microphone into MIC1/MIC2
port on the active speaker rear panel and adjust the volume with MIC volume
adjustment knob.
To Next Page
Loading...
