EDIFIER X3 User Manual

EDIFIER X3 - Charging 2
• Charge the charging case
• Connect to charging cable for charging.
• Indicator steady lit = charging
Indicator light off = fully charged
EDIFIER X3 - Charging 4
Rated input: 5V 50mA(earbuds)
5V 350mA(charging case)
Warning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do
not dispose of batteries in fire to prevent an explosion.
• Power on when taken out of the charging case.

EDIFIER X3 Specifications

General

Product color	Black
Volume control	Rotary
RMS rated power	- W
Housing material	Wood
Recommended usage	Universal
Audio output channels	2.1 channels
Magnetically shielded	Yes
Amplification device form factor	Stand-alone
Satellite speaker type	-
Number of satellite speakers	2
Satellite speakers RMS power	34 W
Satellite speaker sensitivity	85 dB
Satellite speaker dimensions (WxDxH)	90 x 122 x 172 mm
Subwoofer type	Active subwoofer
Subwoofer depth	229 mm
Subwoofer width	233 mm
Subwoofer height	292 mm
Subwoofer dimensions (WxDxH)	233 x 229 x 292 mm
Subwoofer driver diameter (imperial)	6.5 \
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz
Power consumption (typical)	40 W
Frequency range	45 - 20000
Satellite speaker driver diameter	3 \
Connectivity technology	Wired