28
WARNINGS AND DIAGNOSTIC MESSAGES (continued)
PRINTER READY
• The printer is ready to receive data.
PROCESSING
• The printer is receiving data.
OFF
STEADY LIGHT
FLASHING
CONTROL BUTTON
STATUS
RIBBON
• The ribbon is almost finished.
The ribbon will soon run out and you
will need to replace it.
RIBBON
• The ribbon is not recognized, or
is incompatible with your printer
model.
Check the ribbon installed in your
printer.
The Edikio Duplex printer has an LCD touchscreen. Please refer to the LCD screen user guide on how to operate it.
Go to www.evolis.com and under Drivers & Support, select your Edikio printer model and click on the "Manual and Documentation"
tab. Click on the LCD User Guide to download it.
NOTE
To Next Page
Loading...