Boiler-stove system for heating combined with a water heater.
This layout is purely indicative. Have a plumber design and install the system.
LEGEND
AF: Cold Water
AL: Water supply
C: Filling/Topping up
CA: Wall mounted water heater
EV3: Three-way solenoid valve
NA: Normally Open
NC: Normally Closed
GR: Filling unit
MI: Outlet to system
P: Pump (circulator)
RA: Radiators
RI: Inlet from system
S: Drain
SB: Water heater
ST: Temperature Detector
TS: Boiler-Stove
TC: Contact thermostat
V: Ball valve
VA: Automatic bleed valve
Vec: Closed Expansion Tank
VR: Check valve
VSB: Safety pressure valve Internal
stove components Manifold
Boiler-stove system for producing domestic hot water with
assembled KIT 4, combined with a water heater.
This layout is purely indicative. Have a plumber design and install the system.
LEGEND
ACS: Domestic Hot Water
AF: Cold Water
AL: Water supply
C: Filling/Topping up
CA: Wall mounted water heater
EV : Three-way solenoid valve
NA: Normally Open
NC: Normally Closed
F: Flow switch
GR: Filling unit
MI: Outlet to system
P: Pump (circulator)
PS: Detector housing
RA: Radiators
RE: Electronic regulator
RI: Inlet from system
S: Drain
AC: Plate heat exchanger
ST: Temperature Detector
TS: Boiler-Stove
V: Ball valve
Vec: Closed Expansion Tank
VR: Check valve
VSP: Safety pressure valve
ENGLISH
ENGLISH
internal stove components
manifold
internal stove components
manifold
To Next Page