Why is my EdilKamin Indoor Fireplace remote control inefficient?
If your EdilKamin Indoor Fireplace remote control isn't working well, it might be because you're too far from the unit. Try moving closer. Also, check the batteries; if they're weak, replace them with three new AAA alkaline batteries.
What to do if ‘Error rtc-rd’ appears on my EdilKamin Indoor Fireplace display?
If ‘Error rtc-rd’ appears on the display of your EdilKamin Indoor Fireplace, the backup battery inside the control board is likely drained. Replace the backup battery to clear this error.
Why doesn't the ignition/shutdown phase start at the time set on my EdilKamin Indoor Fireplace?
If the ignition/shutdown phase of your EdilKamin Indoor Fireplace doesn't start at the set time, the settings might be incorrect. Check the current time, the program enabling, and whether the program is enabled for the day, according to the instructions given on the board.
General| Fuel Type | Pellets |
|---|---|
| Flue Outlet Diameter | 80 mm |
| Power Supply | 230 V |
| Type | Pellet Insert |
| Heating power (min/max) | 2.5 kW |
| Pellet consumption (min/max) | 0.6 kg/h |
| Tank capacity | 13 kg |
| Control | Remote Control |
| Efficiency (min/max) | 90.1 % |
To Next Page