Need help?Do you have a question about the Edimax 3G-6200nL and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Wireless Speed | Up to 150 Mbps |
| WAN | 1 x 10/100Mbps |
| LAN | 4 x 10/100Mbps |
| Security | WEP, WPA, WPA2 |
| Firewall | NAT, SPI |
| Power Supply | 5V DC, 2A |
| USB Port | 1 x USB 2.0 |
| Antenna | 1 x Detachable 3dBi antenna |
Lists the key features and specifications of the 3G-6200nL wireless broadband router.
Provides essential safety instructions for operating the router to prevent hazards and ensure user safety.
Details the process of setting up a network connection, including 3G/3.5G modem installation.
Explains how to configure client computers to automatically obtain IP addresses for network operation.
Explains how to access the router's web-based configuration interface using a web browser.
Specifies the default username ('admin') and password ('1234') to log into the router's interface.
Explains how to use the `ipconfig` command to find the router's IP address (Default Gateway).
Introduces the Quick Setup menu for configuring basic router parameters.
Guides the user to select the appropriate broadband connection type (e.g., 3G/3.5G, Dynamic IP).
Explains how to connect and configure a 3G/3.5G modem for internet access.
Details the need for PIN code, username, and password for 3G/3.5G modem authentication.
Explains the requirement to install drivers or utilities for specific 3G/3.5G modem cards.
Details plugging in the modem, obtaining IP, and verifying connection status.
Explains how to set up the router for a Dynamic IP internet connection, often used with cable modems.
Details how to configure the router for a Fixed-IP (Static IP) connection, typically for xDSL services.
Explains how to set up the router for a PPPoE internet connection, common for DSL.
Explains how to configure the router for a PPTP internet connection.
Lists and describes parameters for PPTP setup, including User ID, Password, and Gateway.
Explains how to set up the L2TP connection type for the router's WAN interface.
Lists and describes parameters for L2TP setup, including User ID, Password, and Gateway.
Explains how to access the General Setup menu for configuring router parameters.
Lists the five main submenus available within General Setup: System, WAN, LAN, Wireless, Advanced Settings.
Explains how to change the web login password to enhance router security.
Explains how to set up WAN (Internet) connections and select the appropriate connection type.
Provides detailed instructions for configuring a 3G/3.5G modem as the WAN connection.
Covers authentication methods and specific notes for 3G/3.5G WAN setup.
Explains how to set up the Dynamic IP connection type for the router's WAN interface.
Explains how to set up the Static IP connection type for the router's WAN interface.
Explains how to set up the PPPoE connection type for the router's WAN interface.
Explains how to set up the PPTP connection type for the router's WAN interface.
Explains how to set up the L2TP connection type for the router's WAN interface.
Explains how to set up Wired LAN connections and notes that LAN IP settings apply to both wired and wireless.
Details how to configure the router's LAN interface IP address and related settings like DHCP Server.
Introduces the Wireless menu for setting up Wi-Fi parameters like SSID, security, and channel.
Introduces wireless security options, WEP and WPA encryption methods.
Explains how to set up Quality of Service (QoS) to manage bandwidth allocation and priority.
Guides users on how to download and install new firmware for the router.
To Next Page
