Need help?Do you have a question about the Edimax BR-6225N and is the answer not in the manual?
General| Interface | Ethernet |
|---|---|
| Input current | 1 A |
| Input voltage | 12 V |
| xDSL connection | No |
| Dimensions (WxDxH) | 179 x 133 x 25 mm |
| Filtering description | IP/MAC |
| Maximum data transfer rate | 0.15 Gbit/s |
| Non-operating relative humidity (non-condensing) | 10 - 90 % |
| Ethernet LAN | Yes |
| Receiver sensitivity | 11n: 16 ±1dBm, 11g: 16 ±1dBm 11b: 18 ±1dBm 11n (40MHz): -68dBm, 11n (20MHz): -71dBm, 11g: -74dBm, 11b: -87dBm |
| Supported network protocols | PPPoE /Static IP/PPTP/Dynamic IP/L2TP |
| Firewall security | Network Address Port Translation (NAPT) |
| Security algorithms | WPA-PSK, WPA2-PSK |
| Antenna connector type | RP-SMA |
| Antenna gain level (max) | 3 dBi |
| Ethernet LAN (RJ-45) ports | 4 |
| Flash memory | 4 MB |
| Certification | CE, FCC |
| Internal memory | 16 MB |
| Product color | White |
| Operating temperature (T-T) | 0 - 45 °C |
Provides essential safety instructions for proper and secure use of the router.
Guides on physically connecting the modem, router, and computers for network setup.
Instructions for configuring client computers to obtain IP addresses automatically.
Configuration options for various Wide Area Network (Internet) connection types.
Setup and configuration for the router's wireless LAN parameters and security.
Configuration of advanced network functionalities such as QoS, NAT, and Firewall.
To Next Page
