Need help?Do you have a question about the Edimax BR-6428nS V4 and is the answer not in the manual?
General| WPS push button | Yes |
|---|---|
| Security algorithms | 64-bit WEP, 128-bit WEP, IPSEC, SSID, WPA-PSK, WPA2-PSK |
| Certification | CE, FCC |
| USB port | No |
| Ethernet LAN (RJ-45) ports | 5 |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Receiver sensitivity | 11b(11Mbps): ‐85±2dBm 11g (54Mbps): ‐68±2dBm 11n(20MHz, MCS7): ‐68±2dBm 11n(40MHz, MCS7): ‐68±2dBm |
| Ethernet LAN data rates | 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Product type | Tabletop router |
| Product color | Black |
| LED indicators | Power, WAN, WLAN, WPS |
| Transmit power | 18 dBmW |
| Antennas quantity | 2 |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Output current | 1 A |
| Output voltage | 5 V |
| Power source type | AC |
| Cables included | DC, LAN (RJ-45) |
| Wi-Fi band | Single-band (2.4 GHz) |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
Weight and Dimensions| Depth | 88 mm |
|---|---|
| Width | 145 mm |
| Height | 24 mm |
| Weight | 140 g |
Guides the user through setting up the device as a Wi-Fi router.
Guides the user through setting up the device as an Access Point.
Guides the user through setting up the device as a Range Extender.
Guides the user through setting up the device in Wireless Bridge mode.
Guides the user through setting up the device in WISP mode.
Instructions for accessing and logging into the device's web interface.
Allows reconfiguring basic settings or switching operating modes.
Configures WAN and DDNS settings for Internet and WISP connections.
Configures the Wide Area Network connection mode and settings.
Configures Local Area Network settings and IP address.
To Next Page
