Need help?Do you have a question about the Edimax BR-6204WG and is the answer not in the manual?
General| Rack mounting | - |
|---|---|
| xDSL connection | Yes |
| Dimensions (WxDxH) | 187 x 100 x 30 mm |
| Power requirements | 12V 1A DC |
| Mobile network connection | No |
| Maximum data transfer rate | 0.1 Gbit/s |
| Ethernet LAN (RJ-45) ports | 4 |
| Firewall security | Network Address Port Translation (NAPT) |
| Security algorithms | WPA2, 64-bit WEP, 128-bit WEP, WPA |
| VPN support | VPN Pass Throught (IPSec/PPTP) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Flash memory | 2 MB |
| Certification | FCC Class B, CE Mark, C-Tick |
| Internal memory | 16 MB |
| Processor model | Realtek RTL8186 |
| Antenna connector type | RP-SMA |
| Operating temperature (T-T) | 0 - 45 °C |
| Operating relative humidity (H-H) | 0 - 90 % |
| Wi-Fi standards | 802.11g, 802.11b |
| Top Wi-Fi standard | 802.11g |
| Product color | White |
| Power source type | DC |
Weight and Dimensions| Depth | 113 mm |
|---|---|
| Width | 196 mm |
| Height | 30 mm |
Guides on setting up the ISP connection type.
Selects connection type (Cable Modem, xDSL, PPPoE, etc.) for ISP connection.
Configures connection via a cable modem, often with automatic IP assignment.
Configures xDSL with a static IP address provided by the ISP.
Configures PPPoE connection for xDSL, requiring username and password.
Provides wireless LAN security functions including WEP, WPA, and 802.1x.
Redirects specific port numbers from WAN to LAN IP addresses.
Redirects service port numbers to specific LAN IP addresses for external access.
To Next Page
