How to connect Edimax Wireless Router to a network with a hidden SSID in range extender mode?
To connect to a network with a hidden SSID in range extender mode, select “Setup extender manually” during iQ Setup. Then, manually enter the SSID of the hidden network, an SSID for your device, and the encryption information for the hidden network.
General| VPN support | PPPoE, static IP, dynamic IP, PPTP and L2TP |
|---|---|
| Ethernet LAN | Yes |
| Cabling technology | 10/100Base-T(X) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi band | No |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| Ethernet LAN (RJ-45) ports | 4 |
| Antennas quantity | 2 |
| Antenna gain level (max) | 5 dBi |
| Security algorithms | WEP, WPA, WPA2 |
| Input current | 1 A |
| Rack mounting | - |
| WLAN data transfer rates supported | 300 Mbit/s |
| Product color | White |
| LED indicators | Activity, LAN, Link, Power, WAN |
| Flash memory | 4 MB |
| Certification | CE, FCC |
| Internal memory | 16 MB |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | LAN (RJ-45) |
| Output voltage | 5 V |
Weight and Dimensions| Depth | 110 mm |
|---|---|
| Width | 135 mm |
| Height | 28 mm |
| Weight | 161 g |
Connects the power adapter and checks the power LED status for proper connection.
Connects a Wi-Fi device to the 'edimax.setup' network for initial access.
Opens a web browser and navigates to 'edimax.setup' to begin the configuration.
Manual setup steps for connecting to a Wi-Fi network with a hidden SSID.
Addresses cable checks, IP configuration, WAN setup, and direct modem connection.
Ensures computer uses a dynamic IP address for accessing the configuration interface.
Procedure to reset the device to factory default settings using the WPS/Reset button.
Resets the router to factory defaults to recover a forgotten password.
Tips for improving weak wireless signals by checking interference and placement.
Explains how WAN and LAN ports function differently based on the device's operating mode.
To Next Page
