13
III-2. Audio Speakers
You can use the wireless bridge to “bridge” any audio speakers to your Wi-Fi
network via a 3.5mm audio jack.
III-2-1. Connecting to your speakers
1. Use an audio cable (not included) to connect the Wi-Fi bridge’s 3.5mm
audio jack to the “audio in” port of your speakers.
2. Connect the CV-7438nDM’s power supply to a wall socket or an available
USB port, and press the power on/off button to switch the device on.
Ensure the LED is on (white).
III-2-2. Music Streaming
After the wireless bridge is correctly connected to your speakers, you can
stream music to your speakers wirelessly. Follow the appropriate instructions
below for iTunes or other users.
Ensure that your music player (e.g. PC, tablet or smartphone) is
connected to the same router as your CV-7438nDM.
To Next Page
Loading...
Need help?
General
