41
Encryption: Select the encryption type of the wireless
access point or wireless device you wish to
connect. If you’re adding a profile from an
existing access point or wireless device, the
value will be selected automatically, and please
do not modify it.
WPA Input WPA preshared key here. If encryption is
not
Preshared Key enabled, or you select ‘WEP’ as encryption type,
this field will be disabled and grayed out.
WEP Key You can select key type (Hex or ASCII) and
input WEP key here. If encryption is not enabled,
or you select ‘WPA’ as encryption type, this field
will be disabled and grayed out.
To Next Page
