43
Select the profile you wish to use, and click ‘Activate’ to use the
profile you selected. You can only activate a profile a time, and the
profile which is activated currently will have a green check (
)
before its name. If the wireless access point is not reachable, a red
check (
) will be displayed before its name.
If you want to change the connection parameters of a specific
profile, just select it and click ‘Edit’ button, you’ll be prompted to
input the connection parameters, just like you’re creating a new
profile.
If you no longer need a profile, select the profile then click ‘Delete’.
To Next Page
Loading...
