45
Domain Name Please input the domain name of 802.1x
authentication here. This field will be grayed out
when authentication type is not ‘EAP-FAST’.
Use Client If the authentication type you use is ‘PEAP’ or
‘TTLS’, you can use the certificate stored on
your computer. If the authentication type you
use is ‘TLS/Smart Card’, this box is always
checked.
More.. After you clicked this button, you’ll be prompted
to select a certificate on your computer.
Allow This box is always checked and can not be
modified.
unauthenticated
provision mode
Use protected If the authentication type you use is ‘EAP-FAST’
authentication you can use protected authentication credential
credential by check this box.
Remove Remove the credential you imported previously.
Import Import the authentication credential file (PAC or
al file format), you’ll be prompted to select a
credential file from your computer.
Protocol You can select the protocol of tunneled
authentication here. This pulldown menu is only
available when authentication type you use is
‘PEAP’ or ‘TTLS’. When you use ‘EAP-FAST’ as
authentication type, the protocol setting is
always ‘Generic Token Card’ and can not be
changed.
Identity Please input the identity of tunneled
authentication
To Next Page
Loading...
