51
These information displayed here are updated every second,
and here are descriptions of every item:
Status Displays the SSID and BSSID of connected
wireless access point or wireless device
(displayed as SSID <-> BSSID as shown in
above picture. If there’s no active connection
currently, ‘Disconnected’ will be displayed here.
Extra Info Displays the link status (‘Link is up’ or Link is
down’, and the radio transmitting power of your
network card.
Channel Displays the radio channel being used now.
Link Speed Displays the link speed of data transmitting (Tx,
in Mbps) and receiving (Rx, in Mbps). Link
speed is the maximum available data transfer
speed of the wireless connection, and depends
on the radio signal quality of wireless
connection.
Throughput Displays the rate of data transmitting (Tx, in
Kbps) and receiving (Rx, in Kbps).
Link Quality Displays link quality (radio signal quality). When
the link quality is better, the wireless link speed
will be better, too. Link quality is displayed by
percentage and a descriptive word (Good,
normal, weak, and low).
Signal Strength 1 Displays the radio signal strength of built-in
antenna 1.
Signal Strength 2 Displays the radio signal strength of built-in
antenna 2.
To Next Page
Loading...
