Edimax EW-7303APn v2 - Application Diagram; Building 1 Setup Diagram; Building 2 Setup Diagram

2
Edimax Technology (UK) Limited | Using 2 units of EW-7303APn v2
www.edimax.co.uk
Application Diagram
Note: The distance between Building 1 and Building 2 is depending on environment. For your
information, a case study showed that the repeater is working fine with distance of 150 meters
(without obstacles) in between the 2 buildings. Please note that EW-7303APn v2 comes with a 12dBi
directional antenna, the front panel of EW-7303APn v2 must face each other.
At Building 1
LAN
Main router
EW-7303APn v2 (1
st
unit):-
- Connect WAN port to the main
router’s LAN port.
- Setup as Gateway>AP Mode
RJ45/Ethernet cable
At Building 2
EW-7303APn v2 (2
nd
unit):-
- Setup as Repeater so that it can extend the
wireless connection from the 1
st
EW-
7303APn v2 at building 1.
Wireless Connection
LAN port
WAN port