Edimax EW-7303APn v2 - Configuring the First EW-7303 APn v2; Set Up as Gateway;AP Mode

3
Edimax Technology (UK) Limited | Using 2 units of EW-7303APn v2
www.edimax.co.uk
Configuration/Setup
1) The 1
st
EW-7303APn v2 (at Building 1, 1
st
unit) that is wired with RJ45 to the main
router, set it up as a Gateway>AP mode.
 Connect router’s LAN to the WAN port of EW-7303APn v2.
 Connect a computer to the LAN port of EW-7303APn v2 using an Ethernet cable.
Login to EW-7303APn v2 on 192.168.2.1. Open the Internet Explorer, at the
address bar, type 192.168.2.1 and press Enter. Login with default
username/password, admin/1234. Click OK.