14
Parameter Description
Key1 ~ Key4 The keys are used to encrypt data transmitted in the wireless
network. Fill the text box by following the rules below.
64-bit – Input 10-digit Hex values or 5-digit ASCII values as the
encryption keys. For example: “0123456aef“ or “Guest“.
128-bit – Input 26-digit Hex values or 13-digit ASCII values as the
encryption keys. For example:
“01234567890123456789abcdef“ or “administrator“.
256-bit – Input 58-digit Hex values or 29-digit ASCII values as the
encryption keys.
Change/Apply Clcik “Change“ will enable you to setup the WEP key. In the
meantime, the button will change to “Apply“ for you to confirm
your settings.
3.3.2 WPA Setting
The adapter can automatically detect the WPA setting of the AP which the adapter intends
to connect to. To connect to the AP, you should setup the same setting with the AP.
There are two kinds of WPA mode: WPA and WPA-PSK. WPA is designed for enterprise
which requires a RADIUS Server and Certificate Server for the authentication. WPA-PSK is
a special mode designed for home and small business users who do not have access to
network authentication servers. In this mode, the user manually enters the starting
password in their access point or gateway, as well as in each wireless stations in the
network. WPA takes over automatically from that point, keeping unauthorized users that
don't have the matching password from joining the network, while encrypting the data
traveling between authorized devices.
To Next Page
Loading...
Need help?
General