22
Parameter Description
Filter Type Disable – Disable the MAC Address filter function.
Accept – Only the wireless adapters with the MAC Address setup
in the table can connect to the AP.
Reject – The wireless adapters with the MAC Address setup in
the table will be rejected to connect to the AP.
Filter MAC Address MAC Address is a unique identification for hardware devices in
the network. It is a 12-digit hexadecimal values.
There are fifty sets of MAC Address can setup in the table. Fill the
MAC Addresses of wireless adapters you want to accept or reject
to access the AP in this table.
To Next Page
Loading...
Need help?
General