5
12. If your Wifi network has a wireless security password, please enter your password in the box of Network Key and
type again in the box of Confirm Network Key.
Click on Connect.
13. Connection status indicates Acquiring network address.
In a few seconds, the message indicates connected if you entered a correct wi-fi security password.
If your wireless adapter does not connect properly, please verify the wireless security password of your Wi-Fi network.
Please note if your wireless security is WPA2 AES, we suggest you update your WinXP to Service pack 3. XP with Service
Pack 1 or some Service Pack 2 could not support WPA2 AES security.
The wifi icon in the system tray indicates wifi connection too.
To Next Page
Loading...
