Ednet CUBE - Move Around Vertically; Go to Position

A
SSMANN Electronic GmbH I Auf dem Schüffel 3 I 58513 Lüdenscheid I Germany
E-Mail: info@assmann.com I Internet: www.assmann.com
PAGE 34 USER GUIDE
OPERATING CONTROLS
14.7 Move around vertically
Swings the camera vertically (up/down). Press
again to end movement.
14.8 Go to position
With this function, you can steer the camera to a
pre-determined point. 8 different points can be
stored.