Eduard P-51D interior late ser.20-35 S.A. User Manual

1/3
P-51D interior late ser.20-35 S.A.
32 715
32 715
1/32 scale detail set for kit • sada detailù pro model Tamiya 1/32 Tamiya
ORIGINAL KIT PARTS
PÙVODNÍ DÍLY STAVEBNICE
PHOTO-ETCHED PARTS
LEPTANÉ DÍLY
PARTS TO BE REMOVED
DÍLY K ODSTRANÌNÍ
FILL
TMELIT
eduard
REMOVE
ODSTRANIT
OPTION
VOLBA
?
REPLACE
NAHRADIT
BEND
OHNOUT
GRIND
OBROUSIT
SYMETRICAL ASSEMBLY
SYMETRICKÁ MONTÁŽ
DRILL HOLE
VRTAT OTVOR
APPLY EXPRESS MASK AND PAINT BEFORE GLUING
POUŽÍT EXPRESS MASK NABARVIT PRED SLEPENÍM
=
1
2
45
42
49
6
41
41
2 pcs.
34
24
40
43
30
29
44
57
L16
D31
62
62
D46
74
76
68 69
D19, D21
=
60
70
D23
73
D16
65
D42
D53
71
71
50
D15
52
52
19
19
D23
?
4
3
48
D48
5
41
3 pcs.

Eduard P-51D interior late ser.20-35 S.A. Specifications

General

Paint Required	Yes
Glue Required	Yes
Scale	1:48
Category	Aircraft
Model	P-51D

Summary

P-51D Interior Cockpit Assembly

Dashboard and Control Panel

Assembly instructions for the main dashboard and control panel components.

Seat Assembly

Details for assembling the pilot seats, including part numbers D19 and D21.

Cockpit Side Panels and Details

Instructions for attaching smaller parts and side panels to the cockpit interior.

Additional Interior Components

Battery and Fuel Tank Assembly

Assembly steps for the battery (D43) and fuel tank (D35) components.

Control Column and Pedals

Instructions for assembling the control column (D1) and associated parts.

Interior Panel Sub-assemblies

Guidance on assembling specific interior panel sections labelled A, B, C, Q8, Q9.

Parts with Glue Instructions

Separating and Handling Etched Parts

Instructions for separating and removing etched components from protective paper.

Avoiding Surface Contamination

Warning against placing etched components on unwanted surfaces to prevent damage.

Handling Adhesive Areas

Guidance on not touching the adhesive areas of the etched components.

Proper Gripping Technique

Advice on holding parts by edges or non-adhesive areas.

Placement and Adjustment

Instructions for lightly placing, positioning, and adjusting components before permanent affixing.