C410-01-882 Issue B
Page 2 © Edwards Limited 2009. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Construction
2Construction
The pump is constructed from a plastic material (PPS) which has high corrosion resistance properties. The material
is non-flammable and is resistant to a wide range of solvents, mineral and organic acids and alkalis. It must NOT be
used with the following:
Bromine (wet)
Butyl Amine
Chlorosulfonic Acid
Chlorine (dry)
Chromic Acid Conc
Hydrogen peroxide 30%
Morpholine
Nitric Acid 35% to Conc
Sulphuric Acid 98%
Trichlorethylene
Riffled nozzles are provided on the pump for the water and vacuum connections and an internal non-return valve
prevents flooding of the vacuum system in the event of fluctuating water pressure.