To Next PageTo Next Page
Need help?Do you have a question about the Edwards XDS 10 and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | XDS 10 |
| Category | Water Pump |
| Language | English |
Details the general performance characteristics of the XDS pumps, including displacement and pumping speed.
Covers the electrical specifications for single-phase and three-phase XDS pumps, including voltage and frequency.
Highlights critical safety warnings and precautions required for the installation of the XDS dry pump.
Discusses key factors for designing a vacuum system to ensure safe and efficient operation with the XDS pump.
Details the process for checking motor configuration, connecting power, and verifying rotation for single-phase pumps.
Covers checking motor configuration, connecting power, and verifying rotation for three-phase XDS pumps.
Explains how to connect the pump's inlet and outlet ports to the vacuum system, including accessory usage.
Describes the procedure for performing a leak test on the installed vacuum system to ensure integrity.
Explains how to use the gas-ballast control to optimize pump performance for various process gases.
Lists essential safety guidelines and precautions to be followed during all maintenance activities.
Offers troubleshooting guidance for common issues encountered with the XDS dry pump, including failure to start or poor performance.
