A726-01-880 Issue M
Page 34 © Edwards Limited 2010. All rights reserved.
Edwards and Edwards logo are trademarks of Edwards Limited.
Spares and accessories
7.3.3 Vibration isolators
Vibration isolators reduce vibration and noise when the pump is floor or frame mounted and help to reduce strain
when the mounting area is uneven.
Refer to Instruction Manual A248-01-880 for fitting instructions.
7.3.4 Exhaust nozzle kit
The exhaust nozzle screws into the outlet flange. Use the exhaust nozzle to connect the pump outlet to the 12 mm
internal diameter plastic hose.
7.3.5 XDS silencer
The XDS silencer can be used to reduce exhaust noise during pump down and gas ballast operation.
Vibration isolators (pack of 4) A248-01-404
Exhaust nozzle kit A505-09-000
XDS Silencer A505-97-000
To Next Page
Loading...
Need help?
General
