Need help?Do you have a question about the Edwards E2M2 and is the answer not in the manual?
General| Pump Type | Rotary Vane |
|---|---|
| Motor power | 0.18 kW |
| Motor speed | 1500 rpm |
| Frequency | 50/60 Hz |
| Pump Speed | 1.9 m3/h |
| Voltage | 220-240V |
| Outlet connection | DN 16 KF |
| Pumping speed | 1.9 m3/hr |
Provides electrical data, fuse ratings, and connection details for single-phase pump motors.
Details electrical data, fuse ratings, and connection requirements for three-phase pump motors.
Lists key performance metrics like displacement, ultimate vacuum, and water vapour pumping rates.
Highlights essential safety warnings and personal protective equipment for pump installation.
Step-by-step process for correctly filling the pump with the specified oil.
Detailed instructions and diagrams for connecting single-phase motors to the power supply.
Provides wiring diagrams and connection steps for three-phase motors to the power supply.
Procedures for performing leak tests after installation to ensure system integrity and prevent air ingress.
Step-by-step instructions for safely starting the pump, including pre-start checks and warnings.
Troubleshooting advice and steps to ensure the pump reaches its specified ultimate vacuum.
Crucial safety warnings and precautions for personnel performing maintenance tasks on the pumps.
A comprehensive guide to diagnosing and resolving common pump issues like failure to start or poor performance.
To Next Page
