To Next PageTo Next Page
Need help?Do you have a question about the Edwards E2M18 and is the answer not in the manual?
General| Pump Type | Rotary Vane |
|---|---|
| Motor Power | 0.75 kW |
| Pump Speed | 1500 RPM |
| Frequency | 50/60 Hz |
| Inlet Connection | KF25 |
| Outlet Connection | KF25 |
| Voltage | 230 V |
| Inlet Port | DN 16 KF |
| Outlet Port | DN 16 KF |
Details maximum displacement and pumping speed for E1M18 and E2M18 models.
Critical safety warnings and precautions to be observed during pump installation.
Instructions for correctly filling the pump with the specified lubricating oil.
Detailed steps for connecting single-phase motors to the electrical supply.
Procedure for wiring standard single-phase motors to the power source.
Procedures for connecting three-phase motors to the electrical supply.
Steps for making the electrical supply connection to three-phase motors.
Procedure to verify the correct direction of rotation for the pump motor.
Guidance on establishing a secure connection to the pump's inlet port.
Instructions for connecting the pump outlet to exhaust systems or treatment plants.
Procedure for leak testing the vacuum system after installation.
How to operate the gas-ballast control for various pumping conditions.
Step-by-step guide for safely starting the vacuum pump.
Procedure to reach the pump's specified ultimate vacuum level.
Detailed steps for safely shutting down the vacuum pump.
Essential safety warnings and precautions for performing maintenance tasks.
Schedule and instructions for regular pump maintenance operations.
Instructions for draining old oil and refilling with new lubricating oil.
Common causes and solutions when the pump does not start.
