Need help?Do you have a question about the Edwards iXH500H and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | iXH500H |
| Category | Water Pump |
| Language | English |
Defines the manual's scope and explains WARNING/CAUTION labels.
Provides physical and performance specifications for various pump models.
Details typical pumping speed, ultimate vacuum, and maximum inlet pressure for each pump.
Lists electrical specifications, ratings, and connection types for iXH models.
Provides procedures and safety warnings for positioning the pumping system.
Instructions and warnings for connecting the pump to vacuum and exhaust systems.
Provides instructions for connecting the nitrogen supply for purging and process demands.
Instructs on performing leak tests after installation to prevent substance leakage or air ingress.
Details safety requirements and precautions for connecting the electrical supply.
Provides detailed instructions for connecting the electrical supply cable to the main connector.
Explains connecting the system to external control equipment or using the EMS button.
Provides instructions for connecting and regulating the cooling water supply.
Details the steps for verifying system operation and initial start-up.
Provides safety warnings and steps for powering on and starting the pumping system.
Provides procedures for safely shutting down the pumping system.
Explains how the system handles alarms and automatic shut-down conditions.
Details pump protection sensors, triggers for warnings, and alarm conditions.
Explains the function and operation of the emergency stop switch.
Provides guidance on restarting the system after an emergency stop or alarm shut-down.
Outlines safety precautions and frequencies for performing maintenance.
Explains how to adjust the gas module settings for different process demands.
Lists and explains warning messages and their indicators on the system and PDT.
Explains alarm generation, system response, and how alarms are cleared.
Explains how inverters generate warnings/alarms and how to decode the codes.
To Next Page