Edwards nXDS - Service; Return the Equipment or Components for Service

A73502840_D - Service
Page 14
NOTICE:
If we do not receive a completed HS2 form, your equipment cannot be serviced.
4. Service
4.1 Return the equipment or components for service
Before you send your equipment to us for service or for any other reason, you must send
us a completed Declaration of Contamination of Vacuum Equipment and Components –
Form HS2. The HS2 form tells us if any substances found in the equipment are
hazardous, which is important for the safety of our employees and all other people
involved in the service of your equipment. The hazard information also lets us select the
correct procedures to service your equipment.
We provide instructions for completing the form in the Declaration of Contamination of
Vacuum equipment and Components – Procedure HS1.
Download the latest documents from edwardsvacuum.com/HSForms/, follow the
procedure in HS1, fill in the electronic HS2 form, print it, sign it, and return the signed
copy to us.