To Next PageTo Next Page
Need help?Do you have a question about the Edwards nXDS10iC and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | nXDS10iC |
| Category | Water Pump |
| Language | English |
Explains the meaning of different warning, caution, and notice instructions for safe operation.
Explains the pump's classification and requirements under the ATEX directive for use in potentially explosive atmospheres.
Details the general characteristics, pumping speeds, and pressure limits of the nXDS pumps.
Provides essential safety instructions and precautions for installing the nXDS pump.
Details procedures and recommendations for connecting the pump to the vacuum system, including pipework.
Covers fuses, circuit breakers, supply connection, and earthing requirements for electrical installation.
Details how to operate the pump using the buttons on the user interface panel.
Explains how to connect and use the logic interface for parallel control and monitoring of the pump.
Describes how to use the Analogue Speed input for variable speed control as an alternative to standby speed.
Highlights critical safety precautions and warnings for performing maintenance on the pump.
Explains how the service indicator prompts performance checks and tip-seal replacement.
Details the importance and procedure for replacing tip-seals to maintain pump performance.
Troubleshooting steps for when the pump fails to start or stops unexpectedly.
Identifies common causes and solutions for the pump not meeting performance specifications.
Guides on diagnosing and rectifying issues related to poor ultimate vacuum performance.
