1. Safety and compliance
1.1 De
nion of Warnings and Cauons
NOTICE:
This manual mee
ts our obligaon to provide you with informaon. For safe operaon
from the start, read these instrucons carefully before you install or commission the
equipment.
Read all the safety instrucons in this secon and the rest of this manual carefully
and make sure that you obey these instrucons. The equipment must only be
operated and maintained by trained personnel in the proper condion and as
described in this instrucon manual.
Obey local and state requirements and regulaons. If you have any quesons about
safety, operaon or maintenance of the device, please contact our nearest subsidiary.
Important safety informaon is highlighted as warning and cauon instrucons. Obey
these instrucons.
WARNING:
If y
ou do not obey a warning, there is a risk of injury or death. Dierent symbols are
used according to the type of hazard.
CAUTION:
If y
ou do not obey a cauon, there is a risk of minor injury, damage to equipment,
related equipment or process.
NOTICE:
In
formaon about properes or instrucons for an acon which, if ignored, will
cause damage to the pump or the system.
We reserve the right to change the design and the stated data. The illus
traons are not
binding.
Keep the instrucons for future use.
1.2 Safety symbols
The safety symbols on the products shows the areas where care and aenon is
necessary.
The safety symbols that follow are used on the product or in the product
documentaon.
Page 7
A73501880_G - Safety and compliance
To Next Page
Loading...
Need help?
General
