To Next PageTo Next Page
Need help?Do you have a question about the Edwards nXDS10i nXDS15i and is the answer not in the manual?
General| Pump Type | Dry Scroll Pump |
|---|---|
| Pumping Speed | 10 m³/h (nXDS10i), 15 m³/h (nXDS15i) |
| Motor Type | Brushless DC |
| Operating Temperature | +5 to +40 °C |
| Voltage | 100-240 VAC, 50/60 Hz |
| Weight | 15 kg |
Provides operational instructions for the nXDS pump serial communication protocol.
Outlines the four control modes of the nXDS pump: None, Manual, Parallel, and Serial Control.
Details the 15-way D-type logic interface connector and its pins for electrical connections.
Explains connecting the nXDS pump to RS485 or RS232 serial input on control equipment or PC.
Describes activating serial enable via the logic interface for serial commands and its interlock function.
Details the serial communication protocol settings: 9600 Baud, 8 bits, 1 stop, no parity, no handshaking.
Explains the structure of messages for nXDS pump communication, including command and query formats.
Introduces tables summarizing commands, abbreviations, and error codes for controlling and monitoring the pump.
Details serial commands for starting, setting standby speed, and stopping the nXDS pump.
Explains how to connect and communicate with multiple nXDS pumps using a single serial link.
Describes controlling the pump using both parallel and serial interfaces simultaneously.
Explains how to decode system and service status words for fault finding and maintenance.
