12 GETTING STARTED - SETTING UP FIBRE BROADBAND
GETTING STARTED - SETTING UP FIBRE BROADBAND
13
CONNECT AND TURN ON YOUR ROUTER
Plug the other end of the
black ethernet cable into the
red WAN port on your router.
Connect the two parts of the
power supply together.
Plug the power cable into the
router.
Connect the power supply
into a plug socket and turn
it on.
You can now switch
on your router.
3.1 3.2
3.3 3.4
3.5
DISCONNECTING YOUR OLD EQUIPMENT
If you’ve already got a broadband modem or router connected
to your line, unplug the power supply, broadband filters and all
other cables and put them to one side for now.
ENGINEER VISIT
2.1 The engineer will change your telephone socket and
connect the modem for you.
2.2 Connect the black ethernet cable, provided, to the modem.
LAN2
Not in use
To Next Page
Loading...
