eeese Hugo - Cleaning and Maintenance; Cleaning the Dehumidifier; Cleaning the Pre-Filter

MV-2556-2557-08-2022 eeese-aircare.com © All rights eeese air care aps
95
UK
6. Cleaning the dehumidier
When used regularly, the lter may become clogged with dust and particles. To ensure
the eectiveness of the dehumidier, it is recommended to clean the unit at least every
two weeks:
Switch the device o and remove the plug from the socket
before cleaning.
Clean the housing with a soft, dry cloth. Vacuum clean the
air inlet and outlet grilles of the dehumidier. If the device is
extremely dirty, use a mild cleaning agent. Wipe the dehumid-
ier with a slightly damp cloth. Remove the water tank and
wash it by hand using a mild detergent. Rinse it with clean
water.
Note: Do not spray water directly onto the unit.
Cleaning and user maintenance shall not be made by children
without supervision.
The HEPA lter cannot be cleaned and needs to be replaced once a year.
7. Cleaning the Pre Filter Frame
1. Remove the inlet frame from the back.
2. Wash the pre-lter frame carefully in warm water, use
a mild detergent if necessary.
Note: DO NOT wash the pre-lter frame in a
dishwasher.
3. Rinse the pre-lter frame in clean water and let it dry
before reinserting it.
4. Fit the pre-lter frame back onto the unit.
Note: DO NOT use the dehumidier without
the pre-lter frame in place.