12
IV / OPERATING INSTRUCTIONS
Turning on the radiator
1. Plug in and turn on the radiator using the switch on the underside of the
appliance, where the power cable enters the radiator.
2. Next to the display panel: briey press button until the on/off icon
disappears from under the clock part of the display. Fr will appear in the
middle of the display: the radiator is now in Free Operating Mode.
3. Use buttons to select the desired temperature.
Unlocking the radiator
1. The radiator will automatically lock if left unattended for 30 seconds. When
locked, a key icon will be visible in the middle left pane of the display.
2. To unlock the radiator at any time press buttons simultaneously.
Setting the time and date
1. In Free Operating Mode, press button .
2. The time digits in the top left of the display will start to ash.
3. Use buttons to select the desired hour.
4. While the time digits are ashing, press button again to cycle to the
minutes and repeat process.
5. While the time digits are ashing, press button again to cycle through
to the day settings. These are displayed under the time: Monday to Sunday
are represented as 1-7.
6. Press button again to conrm.
Please note: if, during this process, no button is pressed within 5 seconds, the
process will be automatically restarted.
Free Operating Mode
Free Operating Mode is the simplest way to get started with your radiator and
allows you to set a temperature that is controlled by the thermostat.
To Next Page
Loading...