13
1. Press and hold button until the on/off icon disappears from under
the clock part of the display.
2. Fr will appear in the middle of the display.
3. Use buttons to select the desired temperature.
Timer Mode
Timer Mode is convenient if you want to control your energy usage or program
the radiator to shut itself off after a certain time (programmable in increments
of 30 minutes).
1. Press and hold button until the clock icon appears in the middle of the
display.
2. Once the clock appears, use buttons to select the amount of time
you would like the radiator to stay on for. After the display has stopped
ashing, a clock icon will appear.
3. The radiator will switch off when the counter reaches zero.
4. To exit or congure Timer Mode, press and hold button for 3 seconds.
Please note: the radiator may rst need to be unlocked (see ‘Unlocking the
radiator’ above).
Programming your radiator
It is possible to program your radiator to work on a daily (24-hours) program
cycle or even on a weekly program schedule. All schedules can be ne-tuned
to suit your needs.
There are two main heating settings: Comfort (Sun icon) and Eco
(Moon icon). The default factory settings are 22° Celsius for Comfort
temperature and 17° Celsius for Eco temperature.
There is a third default setting, Frost Watch (Ice icon), which keeps the
temperature at 7° Celsius.
It is possible to modify the Comfort and Eco default settings (see ‘Changing
the default Comfort and Eco temperature settings’ below). The Frost Watch 7°
setting cannot be modied.
To Next Page
Loading...
