15
Fine-tuning P1-P9
For each hour of the day (0-24) in a program (P1-P9), you can modify the
heating mode: Comfort, Eco or Frost Watch. To ne-tune one of P1-P9,
proceed as follows:
1. Activate the program you wish to ne-tune (see ‘Program Mode’ above).
2. Press and hold button until the time digits in the top left of the display
show 00:00.
3. Use buttons to cycle through the hours and select the hour to ne-
tune: the selected hour will be displayed in the time digits (00:00 – 23:00)
and ash in the program time bar (0-24).
4. For each selected hour that you wish to change the mode for: use button
to cycle to either Comfort, Eco or Frost Watch mode.
Weekly Program Schedule Mode
The weekly program schedule allows you to program the radiator, taking into
account any differences in your weekday and weekend habits:
1. Briey press button : the middle panel of the display will start ashing
slowly.
2. Use buttons to cycle through the available modes, select AU,
and wait until the middle panel has stopped ashing slowly: the Weekly
Program Schedule Mode is now activated.
3. Press and hold button until the time digits in the top left of the display
disappear and the middle panel of the display starts ashing quickly.
4. The number 1 (indicating Monday) should be visible in the middle box on
the left-hand side of the display.
5. Use buttons to scroll through the preset programs from P1 to P9.
When the desired program has been selected, press button to cycle
through to Tuesday (number 2). Repeat until you have a schedule for the
whole week: Monday (1) till Sunday (7).
To Next Page
Loading...
