19
HOW DO I KNOW IF SOLMATE® IS TURNED ON?
To check whether SolMate® is turned on or off, briefly press the button and observe the status
LED. If the status LED lights up, SolMate® is operating. If it does not light up, the system is
turned off.
TURNING SOLMATE® ON AND OFF
If SolMate® is not used for an extended period (the system is turned off or not charged/discharged
for several days), the battery enters deep sleep mode. This preserves the battery charge so it can
be used when the system is next operated. SolMate® is delivered to you in this state.
To wake the battery from deep sleep mode, connect your system to the panels or the power grid.
After that, you can turn on SolMate® as described below:
1. Press and hold the button (after two seconds, the elongated LED will start glowing turquoise).
2. Keep holding the button until all four LEDs light up one after another. (The power-on or
shutdown process will be canceled if the button is not held long enough.)
3. The LED startup or shutdown animation will then begin.
4. Once the animation stops, no LEDs will be lit, indicating that SolMate® has been turned on or
off.
1.
4.
2. 3.
To Next Page
Loading...