24
DEVICE STATUS
Pressing the round button on the side of the storage unit once lights up the status LED in blue, and
the round LEDs indicate the battery’s charge level. Pressing it again turns the status LED yellow,
showing how much energy is currently being produced by your PV modules. A third press turns
the LED green, displaying either the amount of power fed into the household grid (in grid mode) or
the power provided by the island inverter (in island mode).
If the status LED lights up red, please contact our support team, as this indicates that SolMate® is
in an error state. But don’t worry—most issues can be resolved remotely.
Note
During the initial startup or after prolonged inactivity, the battery level of SolMate® needs to be
calibrated before it is displayed correctly. This process runs automatically in the background but
may take a few days to complete.
TURNING ON STATUS DISPLAY
After powering on and selecting the operating mode, you can check the device status via the
status display. To do this, press the round button on the upper right side of the device, and the
LEDs will light up.
1. Briefly press the round button
2. LEDs light up
25 %
50 %
75 %
100 %
Battery Level (Press Once)
PV Production (Press Twice)
Feed-in Power (Press Three Times)
Error Condition
Warning
1. 2.
To Next Page
Loading...