14
disconnect the external power source and allow the battery to
deplete through normal operations every couple weeks naturally.
Factory Defaults
The factory default settings are as follows:
High Pressure (175 PSI),
Low Pressure (35 PSI),
Temperature (158 degrees).
RESTORE PARAMETERS to FACTORY
DEFAULTS:
Turn off the monitor; press the SET button and activate the monitor at
the same time. The RED light will flash, and factory settings will be
restored.
Pressure Unit: PSI High Pressure: 175 psi (12.1 BAR) Low Pressure: 100
psi (6.9 BAR) Temperature Unit: OF High Temperature: 158 F (70 C)
MONITOR INSTALLATION
Your system comes with three mounting options: a plastic tower with
suction cup mount for window or dash, low profile mount for dash,
low profile triangle mount for dash. Some people prefer to use
Velcro or the small bean bags used
To Next Page
