7
• Built-in rechargeable lithium ion battery.
• Automatic light sensor and backlight.
• Built in motion sensor.
• Configurable high/low-pressure warnings.
• Configurable high-temperature warnings.
• Visible and audible alerts.
• Selectable pressure units.
• The monitor can display in either standard or metric measurements (psi or bar/F or C)
• It monitors up to 26 tires maximum.
• Long range between sensors and monitor.
Sensor Features
• Reliable cap sensors, easy to install.
• Water resistant.
• Replaceable sensor batteries.
• Fast leak alert.
• Individually coded sensors.
Repeater/Booster Features (optional part)
• Maintains signal stability.
• Records sensor ID, trailer ID and tire pressure and temperature limits.
• Visible and audible alerts.
• Fixed alarm for high temperature (194°F)
SYSTEM SETUP
This portion is designed to make the set-up of your new EEZ RV PRODUCTS
EezTire E518 TPMS System easier and faster.
Much of the information contained in this manual is found through real life
experience using the system and passed on to hopefully make the utilization
of the system easier for you.
Please read through the guide thoroughly before starting. Complete set-up
should take approximately 20 minutes.
EEZ RV PRODUCTS EezTire E518 SYSTEM
START YOUR SET UP HERE - Step by Step Instructions:
1. Unpack all the components of your TPMS System and ensure it is
complete.
2. Take the number kit from the accessory pack and number all your
sensors as indicated below. (Hint: After affixing the number to the
To Next Page
Loading...
