The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
without having to give prior notice or replace this manual.
OPERATING AND MAINTENANCE MANUAL
FOR SAUNA
EN
11
4.5 TEMPERATURE CONTROL
You can set the temperature you would like inside the sauna by turning the dial.
The temperature can be set at from about 122 °F to about 212 °F.
When you raise the temperature, the READY LED ashes slowly, indicating that the heater has started working.
Once the set temperature has been reached, the LED stops ashing and stays on.
N.B: When the sauna is in regular use, just opening the door creates a sudden change in temperature
which is detected by the operating probe.
The sauna is perfectly safe to use when the READY LED is ashing.
5. LOCK CONTROL PANEL
If you press buttons “LIGHT” + “COLOUR CHANGE” together for 5 seconds, the panel is locked in its current settings.
5 sec.
Shown by three ashes
of the “SAUNA” button
To unlock the control panel, repeat the above sequence.
N.B.
Prolonged pressing of the “SAUNA” button, even when the control panel is locked, turns
everything o.
To Next Page
Loading...
