effegibi Sky - SCOPE of the Manual; Product Identification Details

6
The data and features referred to are not binding on EFFEGIBI and the company reserves the right to make any appropriate changes
without having to give prior notice or replace this manual.
OPERATING AND MAINTENANCE MANUAL
FOR SAUNA
EN
2 SCOPE OF THE MANUAL
The purpose of this manual is to provide a guide to the proper use and maintenance of a Sauna product.
Keeping your product in good working order depends largely on eective cleaning and maintenance (see chapter 7 of this
manual).
Therefore it is extremely important to learn how to clean and maintain it properly.
The instructions for the functions and ways to use the product provide only the necessary basic information and only
experience can teach you how to get the best out of it and to exploit its full potential for meeting the needs of your body.
The Sauna has been built in compliance with the following mandatory safety standards:
- CSA Standard C22.2 No 0 General Requirements - Canadian Electrical Code, Part II;
- CSA Standard C22.2 No 0.4 Bonding and Grounding of Electrical Equipment
(Protective Grounding);
- CSA Standard C22.2 No 218.1 Spas, Hot Tubs and Associated Equipment;
- ANSI/UL Standard 1563 - Spas and Hot Tubs [Certied to US Standards].
On the basis of our on-going quest for improvement, your product may present some variations that are not referred to in
this manual, but any dierences are minor and of no great importance.
2.1 PRODUCT IDENTIFICATION DETAILS
All the necessary information for identifying your sauna, the type, model, electrical power, voltage, registration
number, year of construction, manufacturer and CE markings, are shown on the plate attached to the heater wall
inside the sauna.
Sauna Heater: CSA Certication Pending
Service 70031713 - 70031714
CSA C22.2 No. 218.1
UL Std 1463
CSA Class: C699103, C699183
208Vac 1P 60Hz
240Vac 1P 60Hz