Effekta ME 400 - Accessories

USV ME400/500/600/650/800 Instruction Manual
ME series
Page 30 of 32
Model:
ME800
Power:
800VA / 425W
Mains power
input:
Phases
1 phase conductor + neutral conductor
Input range
170-280V AC
Rated frequency
50 / 60Hz
Synchronous range
45-65Hz
Boost (+13%)
yes
Buck (-13%)
yes
UPS output:
Rated voltage (support
mode)
230V AC
(modified sine +/-10%)
Max. output current
3.5A
Bridging time
3 min.
Efficiency:
AC -> AC
>94%
DC input
Input voltage
12V DC (rated)
Interface:
LAN / RS232
9-pin D-SUB socket or USB
(galvanically isolated)
Environmental
data:
Perm. temp. range
0...+40°C
Recommended temp.
+15...+25°C
Storage temperature
0...+40°C
Rel. atmos. humidity
0...90% (non-condensing)
Standards:
EN 50091-1, EN 50091-2
General
Cooling
Convection cooling without fans
Noise level
<35dB
Weight
6.4kg
Inspections
TÜV / GS / CE
Dimensions
H x B x D [mm]
171 x 95 x 357mm
14.2 Accessories
Below is a list of components that have been specifically tested and approved
for this UPS by EFFEKTA Regeltechnik GmbH:
Accessory:
Function:
Item number:
Software package
“UPSILON 2000”
Shutdown and diagnosis software
UPSILON 2000