To Next PageTo Next Page
Need help?Do you have a question about the Effekta MTD 700 and is the answer not in the manual?
General| Apparent Power | 700 VA |
|---|---|
| Active Power | 420 W |
| Input Voltage | 220/230/240 VAC |
| Output Voltage | 220/230/240 VAC |
| Battery Type | 12V/7Ah |
| Frequency | 50/60 Hz |
| Operating Temperature | 0-40 °C |
| Transfer Time | Typical 2-6 ms |
| Battery Recharge Time | 4-6 hours |
| Communication Interface | USB |
Ensures safe operation by adhering to technical rules and intended design use of the UPS.
Details critical safety measures for connecting power, operating the UPS, and handling its components.
Warns of dangers associated with accumulators, including shocks, burns, and explosion risks.
Outlines safety rules for maintenance, service, and handling potential high-voltage parts.
Explains various UPS operating modes (charging, mains, support, faulty) and how to interpret status displays.
Details the correct sequences for switching the UPS system on and off.
Guides on how to modify fundamental UPS operating parameters and configurations.
Describes methods to measure the UPS backup time duration under load.
Provides critical safety warnings and procedures for replacing UPS battery accumulators.
Presents detailed technical data for the tower housing UPS models (700 to 3000).
Presents detailed technical data for the rack mountable UPS models (700RM to 3000RM).
