7.2.2 Shutting and switching off the UPS
With a running UPS, it is shut off by simultaneously pressing both the keys
"Menu down" and "Menu up" (hold down for approx. 3 sec.). Press the "POW-
ER ON/OFF" key for approx. 3 sec. with the types 1000RM / 1500RM.
The UPS remains in the charging operation mode to keep the accumulators
charged and ready for operation. To completely switch off the UPS system, the
device must be unplugged by separating the power cable from the mains.
7.2.3 Changing the basic settings
Before you change the basic settings, you should consider the following
points:
False settings can cause damage to the UPS and the load.
Inform yourself about the technical data of the connected loads.
Separate all loads from the load output.
Make sure that the UPS is in the switched-off operating mode.
The new settings are only adopted after a complete restart (switch
off; pull mains plug until system stops; reinsert mains plug).
To Next Page
Loading...
