EFLOW E3 NITRO - Page 19

proper quick release tension is achieved.
Tires:
Bicycle tires normally lose pressure over time. An under
inated tire can cause premature tire failure, and will require
signicantly more energy (electric and human) to propel the
bicycle. Low tire pressure will have a signicant negative
impact on battery range. Ensure that both front and rear
tires are inated to the recommended tire pressure indicated
on the sidewall of the tire. Check the tires for any damage
or unusual wear. The tire should be properly seated in the rim
and the t of the tire bead in the rim should be periodically
checked. Ensure that the tire is not cracked or excessively
worn. Check for foreign objects in the tread, and that the
valve stem is straight in the rim. Damaged or worn tires
should be replaced immediately. Take the bicycle to a
qualied bicycle mechanic to repair and/or replace your
tires if necessary.
Reectors:
Your bicycle comes equipped with eight (8) reectors (front
handle bar, rear fender, front wheel, rear wheel and two
each on the left and right pedals) to make you more visible
at night. Please ensure that those reectors are in place,
properly positioned and clean before each ride.
Drive chain:
Your eFlow bicycle is equipped with a high quality roller
chain that needs to be cleaned and lubricated regularly.
p. 19/52