EFLOW E3 NITRO - Connecting Charger to Bike Battery; Charging Battery Off Bike; Connecting Charger to Removed Battery

• Carefully align the connector pins and connect the
charger to the battery by plugging the connector into the
charger receptacle.
•
• Turn ON the charger using the ON/OFF switch on the
charger.
To charge the battery when it is not installed in the bike:
• Locate the battery adapter supplied with the bike and
connect it to the battery charger connector. (See below.)
• Plug the adapter into the battery pack at the pack
connector at the bottom of the battery. (See below.)
p. 41/52