What to do if EFOY Network Router shows 'Battery voltage low'?
If your EFOY Network Router displays a 'Battery voltage low' message, first, inspect the cabling to ensure it's properly connected. Then, verify that a suitable battery is connected. Check the battery voltage, and if it's too low, charge the battery using a battery charger. Also, inspect other charging devices like alternators or charge controllers for any potential defects.
What to do if EFOY Network Router says 'Cooling insufficient'?
If your EFOY Network Router displays an 'Interruption: Cooling insufficient' message, it means that the cooling air is not sufficient or the ambient air is too warm. Check if the room where the fuel cell is installed has enough ventilation. Also, check if the air supply openings in the EFOY Pro fuel cell are blocked.
What to do if EFOY Network Router indicates 'Battery voltage high'?
If your EFOY Network Router displays a 'Battery voltage high' message, check the cabling to ensure it's properly connected and that a suitable battery is connected. Inspect any additional charging devices, such as alternators or charge controllers, for defects.
What to do if EFOY Network Router shows 'Short-circuit has occurred'?
If your EFOY Network Router indicates a short-circuit, first ensure that the polarity of the charge line is correct. Then, switch off the device and identify the cause of the short circuit or overload. Eliminate the error before restarting the device.
What to do if EFOY Network Router says 'No battery is connected'?
If your EFOY Network Router indicates that no battery is connected, or that the battery hasn't been properly connected, or that a deep discharge has occurred, check the pins, polarity, and cables. Connect a charged battery to start the device.
What to do if EFOY Network Router needs a restart?
If your EFOY Network Router requires a restart, select the "System reset" option in the main menu to restart the device (you can do this a maximum of two times).
What to do if EFOY Network Router exhaust hose is blocked?
If your EFOY Network Router indicates that the exhaust hose is blocked, bent, or frozen, check the installation of the exhaust hose and position it so that condensation cannot gather. Ensure you do not bend the exhaust hose. If necessary, clean the exhaust hose and protect the opening from becoming clogged. Consider shortening the exhaust hose if condensation is gathering in it.
What to do if EFOY Network Router shows 'Surroundings too warm'?
If your EFOY Network Router indicates that the surroundings are too warm, the device will start automatically once the temperature drops to below 50°C/122°F.
What to do if EFOY Network Router cartridge connection is faulty?
Check the fuel cartridge connection and, if necessary, check for any contamination and remove it. Then perform a system reset (max. twice).
Why EFOY Network Router is frozen?
The EFOY Network Router freezes if it was exposed to temperatures below 1°C/34°F without a connected battery and/or an EFOY fuel cartridge that was not filled sufficiently. Allow the device to defrost for approximately 24 hours at room temperature.
General| Brand | EFOY |
|---|---|
| Model | Pro 600 XT |
| Category | Network Router |
| Language | English |
To Next Page
